TL-2025D is an optical micrometer which has a strong adaptability to dusty and mosit environment.It is applicable to flat wire width and thickness measurement as well as round wire diameter,lump and neck measurement with a measurement range from 0.2 to 25mm.
High Impact Resistance , Strong adaptability to temperature change
Precision CNC manufacturing casing,independent design of casing and inside optical parts with a impact resistance of 10G/6ms, vibration resistance of 10-55Hz/1.5 in XYZ for 2 hours, preventing the optical parts from damaging.
Individual temperature compensation technology enables the device measurement results not to be affected by temperature change.*
*The measurement diameter change will be≤0.001mm if object diameter is 10mm.
Measurement is accurate even if there is water and dust
Thanks to individual optical system and measurement algorithm, the measurement data of TL2025D is still accurate at complex environment.
Environmental adaptability reaches to IP65.Besides,air filter is available to prevent lens front side from contamination ,ensuring measurement data is accurate at various extremely complex environment.
Application
It is applicable to measure the width and thickness of flat objects, like flat enamelled copper wires, ribbon wires,stainless steel belts,flat cables. It is also applicable to the measurement of round object regardless of transparent and nontransparent ,like medical tube, electrical wires and cables,as well as
lump and neck.
Technical parameter
| Model | TL-2025D |
| Axis | 2-axis |
| Measurement data | Diameter &Ovality,Width&Thcikness， Lump&Necks |
| Application field | Round wire ,Transparent wire, Flat wire |
| Sampling frequency | 10KHz(signal axis) |
| Measurement range | 0.2~25mm |
| Repeatability（1） | ±0.1μm |
| Measurement accuracy（2） | ±2μm |
| Dimensional | 296*270*54mm |
| Working power | 24V ±10% 40VA |
| Display | LED |
| Communication port | Default：RS485 MODBUS RTU、CAN、WIFI Option：PROFIBUS、PROFINET、EtherNet/IP、EtherCAT,etc. |
| Electrical port | Default：Digital output (relay), Digital input,Analog input encoder pulse input port. Option: PI feedback control, Analog output(3) |
Environmental adaptability | Working Environment：0~50℃ Working Environment：20~85%RH(No condensation) Working environmental brightness：Brightness of working environment Incandescent light， fluorescent lamp 3000lx or less Vibrating resistance：10~55Hz full amplitude 1.5mm in XYZ direction for 2 hours Impact resistance:10G/6ms |
| Water-proof grade | IP65 |
| Data collection analysis | DMS1000 measurement software system、DS14 ZT display and control system |
| Out-of-tolerance alarm | Support |
| Transparent mode | Support |
NOTE:
（1）Set the average number of times to 1150 and measure the ±2σ value of the round standard rod of diameter 10mm at the measurement area center.
（2）For object diameter of 10mm, the measurement accuracy is ±2um when it moves in the center of 8*8mm；
（3）PI feedback control and analog out options shall be ordered at placing device order.
